Smooth-On Mold Star 16 FAST Platinum Silicone Rubber Kit
Smooth-On Mold Star 16 FAST Platinum Silicone Rubber Kit
Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star 16 FAST is a fast material with a 6 minute pot life and 30 minute cure time.
Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, and other materials. Cured Mold Star rubber is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys.
Mold Performance & Storage - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Mix Ratio By Volume: 1A:1B
Mix Ratio By Weight: 1A:1B
Pot Life: 6 Minutes
Cure Time: 30 Minutes
Shore Hardness: 16 A
Specific Gravity: 1.18 g/cc
Specific Volume: 23.5 cu. in./lb
Tensile Strength: 400psi
100% Modulus: 55psi
Elongation @ Break: 440%
Die B Tear Strength: 88pli
Color: Blue-Green
Useful Temperature (Max): 450 F
Useful Temperature (Min): -65 F
Shrinkage: <.001in. / in.
Mixed Viscosity: 12,500 cps
Note: Mold Star rubbers are not intended for brush-on moldmaking.
- SKU Number
- SMN22542
- MSRP
-
$41.99 / EA - Your Price
- $39.99 / EA
- Weight
- 2.50 LB
- Quantity Available
- 2
