PC-Products PC-Metal Epoxy Putty 2oz
PC-Products PC-Metal Epoxy Putty 2oz
PC-Metal Putty Epoxy replaces metal. Mix with fingers and apply. Quickly PC-Metal cures to reattach metal (30 min). Cures hard, fast, nonconductive. Contains metal sticks to metals such as cast iron, zinc, aluminum, stainless steel, steel and copper.
Remove contaminants such as dust, dirt, oil and grime with a solvent such as denatured alcohol (ethanol), acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner. Mild detergent solution in water is also good removing contaminants. Use a clean paper towel or rag for wiping. Remove rust and loose paint with sandpaper or wire brush. Epoxy typically sticks to most paints. If there is a concern of the paint's adhesion then remove it with sandpaper, wire brush or paint stripper. Smooth, glossy and shiny surfaces should be roughened using sandpaper to increase adhesion. Adhesion to wet or damp surfaces can be improved by wiping with alcohol. Do not use mineral spirits or paint thinner for removing contaminants.
It is recommended to wear disposable gloves when mixing and applying epoxy putty. Remove from skin with soap and warm water. Clean up mixed epoxy before it cures with paper towels and solvent. Denatured alcohol (ethanol), acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner are suitable solvents for removing uncured epoxy. Cured epoxy can be physically removed by prying off with a screw driver or pliers. It can also be removed with paint stripper or remover.
Coverage: 2.5 cubic inches
- SKU Number
- MSX25550
- MSRP
-
$8.80 / EA - Your Price
- $7.04 / EA
- Weight
- 0.20 LB
- Quantity Available
- 7