PC-Products PC-Marine 2oz
PC-Products PC-Marine 2oz
PC-Marine is a hand moldable putty epoxy designed for quick emergency-type repairs. Cut, mix and apply. PC-Marine allows a working time of about 15 minutes and cures for service in 60 minutes. Cures: Wet, Dry and Underwater. PC-Marine can be applied to wet, dry and underwater surfaces that are clean.
Remove contaminants such as dust, dirt, oil and grime with a solvents such as denatured alcohol, acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner. Mild detergent solution in water is also good removing contaminants. Use a clean paper towel or rag for wiping. Do not use mineral spirits or paint thinner for removing contaminants. Remove rust and loose paint with sandpaper or wire brush. Epoxy typically sticks to most paints. If there is a concern of the paint's adhesion then remove it with sandpaper or wire brush. Smooth, glossy and shiny surfaces should be roughened using sandpaper to increase adhesion.
Wear disposable gloves to minimize contact with skin. Use denatured alcohol, acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner to cleanup before PC-Marine cures. Clean hands and skin with soap and water. Cured epoxy can be removed by applying paint remover or paint stripper to soften the epoxy surface. Scratch off the softened epoxy. Repeat as needed.
Coverage: 2.5 cubic inches
- SKU Number
- MSX25567
- MSRP
-
$8.80 / EA - Your Price
- $7.04 / EA
- Weight
- 0.15 LB
- Quantity Available
- 6