Liquitex Professional Flow Aid Additive 4oz
Liquitex Professional Flow Aid Additive 4oz
Fully intermixable with all Liquitex products, Liquitex Professional Flow-Aid Additive breaks water tension to improve flow and lower viscosity while giving a smooth finish with less brush strokes due to reduced surface friction. Increases transparency and makes color more absorbent and blendable.
First dilute your concentrated Flow Aid with water - 1 part Flow Aid to 20 parts water - distilled water will give the best results. Use 1 part Flow Aid to 10 parts water if you want a more concentrated effect. Add up to 25% of diluted Flow Aid to your color/medium and stir slowly to avoid foaming. If it does foam, leave it to sit while the foam disappears. If applying to an absorbent surface, your color/medium will sink in like a stain or dye; if using on a non-absorbent surface your color/medium will be more fluid and take longer to dry.
Do not use Flow Aid undiluted as it results in poor acrylic adhesion, cracking, tackiness and water sensitivity. As this is an additive---with no acrylic binders - do not add more than 25% to your color/medium and do not mix with other additives. This can cause excessive shrinkage, cracking and the acrylic film to break down. Do not shake or stir too vigorously as foam will form. Do not use for marbling as it breaks the surface tension of the water. Do not use with any non-acrylic media.
- SKU Number
- LIQ5620
- MSRP
-
$13.29 / EA - Your Price
- $10.99 / EA
- Weight
- 0.35 LB
- Quantity Available
- 4
