Jacquard Puff Additive 8oz
Jacquard Puff Additive 8oz
Jacquard Puff Additive is used to increase the relief of prints on paper, natural or synthetic fabric and vinyl, metal and leather surfaces. Simply mix a little of the additive into your Jacquard Screen Ink (up to 20%), print as usual and then apply heat to your print. The microspheres in the Puff Additive expand with heat, giving you a raised print only after heating. Once puffed, the print is washfast and dry-cleanable.
USE: Add to Jacquard Screen Ink (JSI) up to 20% by weight. Mix thoroughly. Pot life of mixture is indefinite. Apply heat to print and ink will puff in all directions. For use on paper, fabric, and other surfaces.
FINISH: Puff Additive has a matte finish and will affect the semi-gloss finish of JSI in proportion to the amount added.
OPACITY: Puff Additive becomes opaque upon expansion and will opacify JSI in proportion to the amount added.
MESH COUNT: 80-305/inch (32T-122T cm) or according to ink specifications. JSI is recommended with mesh counts 80-160/inch (32T-64T cm).
DRYING / CURING: While print is wet, heat the entire ink deposit to 275F/135C using a hot air gun or oven to puff. Do not overheat. For best results, allow ink to air cure 72 hours once puffed before washing.
CAUTION: Always test this product for washability and durability prior to production.
Cleans up with water or mild detergent.
- SKU Number
- JACJSI2300
- MSRP
-
$29.99 / EA - Your Price
- $22.99 / EA
- Weight
- 0.15 LB
- Quantity Available
- 4