Eclectic E6000 Industrial Strength Adhesive 0.5oz Clear
E6000 is formulated to meet high performance industrial requirements. E6000 is 2x strong and 60x more flexible than Polyurethane. The self-leveling formula forms a powerful bond with most any material and will remain flexible once cured. E6000 Industrial will handle just about any project DIYers or PROs throw at it! This adhesive is paintable (paint to match surrounding area to make UV-resistant) and temperature resistant which is unaffected by extreme heat or cold once cured.
Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use. Ideal application temperature range is 50 to 90 F (10 to 32 C). However, fully cured adhesive can withstand temperatures from -40 to 180 F (-40 to 82 C) intermittently. Apply directly to surfaces to be bonded or repaired.
Allow 24 hours for curing--Maximum bond strength may not be reached for up to 72 hours. TUBE: For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. CARTRIDGE: For prolonged storage after opening, cover or plug the opening of the nozzle. Clean uncured adhesive with acetone or citrus-based solvents.
Product is paintable and immediately resistant to precipitation upon application. May damage finished surfaces. Avoid such contact until completely dry. Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam or paper products.